Quidway WB2011 Betriebsanweisung PDF herunterladen (Seite 42)

Initial Configuration

4-6

2. IP Configuration – Either enable or disable (Dynamic Host Configuration

Protocol (DHCP) for automatic IP configuration. If you disable DHCP, then

manually enter the IP address and subnet mask. If a management station exists

on another network segment, then you must enter the IP address for a gateway

that can route traffic between these segments. Then enter the IP address for

the primary and secondary Domain Name Servers (DNS) servers to be used for

host-name to IP address resolution.

DHCP Client – With DHCP Client enabled, the IP address, subnet mask and

default gateway can be dynamically assigned to the access point by the

network DHCP server. (Default: Enable)

Note: If there is no DHCP server on your network, then the access point will

automatically start up with its default IP address, 192.168.1.1.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 156 157

Keine Kommentare

Quidway WB2011 Betriebsanweisung Seite 42